Error Messages

This unit is provided with a self-diagnostic function that

 

Note

 

 

 

 

 

 

detects internal abnormalities. When it detects an

 

To display error messages on the monitor screen, connect

abnormality, it outputs an error message to the monitor

 

the monitor to the VIDEO OUT 2 (SUPER) connector, and

screen and indicates an error code in the time counter

 

set the CHARA. DISPLAY menu item (see page 40) to

display.

 

ON (factory default setting).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ERROR

 

 

 

 

 

 

 

 

 

 

AN ERROR HAS BEEN

 

Error message

 

 

 

 

 

 

 

 

 

 

 

 

 

DETECTED. INFORM SERVICE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OF FOLLOWING CODE:

 

 

 

 

 

 

 

 

 

 

02-603

 

 

 

 

 

 

Error code

 

 

 

 

 

 

 

 

 

 

 

PRESS EJECT KEY

 

Direction

 

 

 

 

 

 

 

 

 

 

Error code

 

TO EJECT TAPE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Error02-603

 

 

 

 

 

 

 

 

 

 

 

 

 

Monitor screen

 

Time counter display

 

 

 

 

 

 

 

 

 

 

 

If an error message appears, follow the direction indicated

 

 

 

 

 

 

 

 

on the monitor screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm Messages

 

 

 

 

 

 

 

 

When operating this unit, the unit may sometimes output

 

 

 

 

 

 

 

 

alarm messages such as the one shown below to the

 

 

 

 

 

 

 

 

monitor screen and the time counter display.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ALARM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cause

of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE MODE IS SELECTED

 

alarm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESS REMOTE BUTTON

 

Direction

 

 

 

 

 

 

 

 

TURNING IT OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE!

Monitor screen

Time counter display

If such an alarm message appears, a connection or operation error may have been made, or condensation on heads may have occurred. Follow the direction indicated on the monitor screen.

Note

To display alarm messages on the monitor screen, it is necessary for the monitor to be connected to the VIDEO OUT 2 (SUPER) connector, and set the following menu items to ON.

•CHARA. DISPLAY (see page 40)

•ALARM (see page 41)

•REF ALARM (see page 41)

Troubleshooting and Maintenance 6 Chapter

Troubleshooting 63