aAUDIO OUT CH-1 (channel 1) to CH-4 connectors (XLR 3-pin, male)
These connectors output channel-1 to channel-4 analog audio signals, respectively.
It is possible to use the AUDIO OUT CH-3 and AUDIO OUT CH-4 connectors for audio monitor output for channels 1 and 2, respectively (use the OUTPUT CH3/4 menu item (see page 43).
bAUDIO MONITOR OUT connector (RCA phono
jack)
This connector outputs audio signals for monitoring. The audio signals to be output from this connector can be selected with the MONITOR SELECT switches on the menu control panel.
DExternal device connectorsb REMOTE connector
aVIDEO CONTROL connector
aVIDEO CONTROL connector (D-sub15-pin)For remote control of the internal digital video processor, connect an optional remote control unit to this connector.
bREMOTE connector (D-sub 9-pin)
Use the optional 9-pin remote cable to connect an editing controller that supports this unit, or a VCR that supports editing with two units (DSR-2000A/2000AP, etc.), to connect those devices to this unit for remote control.
18 Location and Function of Parts
