S-video (DSR-1600A):

 

30 Hz to 5.0 MHz ±1.0 dB (Y),

 

5.75 MHz +0/−3.0 dB (Y) (TM)

 

S-video (DSR-1600AP):

 

25 Hz to 5.0 MHz ±1.0 dB (Y),

 

5.5 MHz +1.0/−2.0 dB (Y),

 

5.75 MHz +0/−3.0 dB (Y) (TM)

 

Component (DSR-1600A):

 

30 Hz to 5.0 MHz ±1.0 dB (Y),

 

5.75 MHz +0/−3.0 dB (Y) (TM),

 

30 Hz to 1.3 MHz ±1.0 dB (C),

 

1.5 MHz +0/−5.0 dB (C)

 

Component (DSR-1600AP):

 

25 Hz to 5.0 MHz ±1.0 dB (Y),

 

5.5 MHz +1.0/−2.0 dB (Y),

 

5.75 MHz +1.0/−3.0 dB (Y) (TM),

 

25 Hz to 1.5 MHz ±1.0 dB (C),

 

2.0 MHz +1.0/−2.0 dB (C)

S/N

Composite output (Y):

 

53 dB or more

 

S-video output (Y): 55 dB or more

 

Component output (Y): 55 dB or more

Y/C delay

30 ns or less

K-factor

2.0% or less (K2T, KPB)

Processor adjustment range

Video level

±3 dB/−∞ to 3 dB selectable

Chrome level

±3 dB/−∞ to 3 dB selectable

Setup/Black level

 

±30 IRE (±210 mV)

Chroma phase

±30°

Y/C delay

±100 ns

System phase

Sync: ±1 μs *

SC: ±180°

* +2 μs to –3 μs when using a TBC remote control unit

Audio performance

Frequency response

Two-channel (48 kHz) mode:

20Hz to 20 kHz +0.5 dB/−1.0 dB Four-channel (32 kHz) mode:

20Hz to 14.5 kHz +0.5 dB/−1.0 dB

Dynamic range More than 90 dB Distortion (THD + N)

Less than 0.05% (48 kHz)

Input connectors

Analog video inputs

REF. VIDEO IN

BNC type (×2, loop-through) Black burst

0.286 Vp-p (DSR-1600A) or 0.3 Vp-p (DSR-1600AP), 75 Ω, negative sync

Composite sync

Output connectors

Digital signal outputs

SDI OUT (with optional DSBK-1601 SDI/AES/EBU Output Board installed)

BNC type (×2, active-through), Serial Digital Interface format (270 Mbps), SMPTE 259M/ITU-R BT.656

DV IN/OUT 6-pin IEEE 1394 connector

Analog video outputs

REF. VIDEO OUT

BNC type ×1 Black burst

0.286 Vp-p (DSR-1600A) or 0.3 Vp-p (DSR-1600AP), 75 Ω, negative sync

Composite sync

VIDEO OUT 1, 2 (SUPER)

BNC type (×2), composite, 1.0 Vp-p,

75Ω, sync negative

COMPONENT VIDEO OUT

BNC type (×3), Y/R−Y/B−Y

Y:1.0 Vp-p, 75 Ω, sync negative

R−Y: 0.7 Vp-p, 75 Ω (75% color bars for DSR-1600A or 100% color bars for DSR-1600AP)

B−Y: 0.7 Vp-p 75 Ω (75% color bars for DSR-1600A or 100% color bars for DSR-1600AP)

S VIDEO OUT DIN 4-pin

Y:1.0 Vp-p, 75 Ω, sync negative

C:0.286 Vp-p (DSR-1600A) or

0.3 Vp-p (DSR-1600AP), 75 Ω (burst level)

Analog audio outputs

AUDIO OUT XLR 3-pin, male (× 4), +4/0/−3 */−6 dBu, 600 Ω loading, low impedance, balanced

AUDIO MONITOR OUT

Phono jack, 47 kΩ, unbalanced

−∞ to −11 dBu ±1 dBu, −20 dBFS (DSR-1600A)

−∞ to −9 dBu ±1 dBu, −18 dBFS (DSR-1600AP)

* Selectable on DSR-1600AP only

Appendixes

Specifications 67