For details of cassette insertion see page 21, and for usable cassette types see page 19.
The cassette is automatically drawn into the unit. The STOP button will light, and a few seconds later a still image will appear on the monitor screen.
2 Press the PLAY button.
This starts the playback operation. When the tape is played back all the way to the end, the unit automatically rewinds it and then stops.
If the following indicators light when a cassette is loaded
Indicator | It means: |
|
|
Cassette memory indicator | The loaded cassette contains a cassette memory. |
|
|
ClipLink indicator | There is ClipLink log data stored in the cassette |
| memory on the loaded cassette. |
|
|
To perform the following operations
Operation | Do this: |
|
|
Stop playback. | Press the STOP button. |
| The unit enters stop mode, and will automatically |
| switch to standby off mode after the time set with the |
| STOP TIMER menu item (see page 41). |
Adjust the audio playback | Use the audio level control on the monitor. |
level. |
|
|
|
Play back in shuttle mode | Press the SEARCH button or search dial to light the |
while monitoring the video. | SHUTTLE indicator in the display section, then rotate |
| the search dial. |
| Playback is carried out at the speed determined by |
| the angular position of the search dial. |
| The maximum speed for shuttle playback can be |
| changed using the SHUTTLE menu item (see page |
| 39). |
Play back in jog mode while | Press the SEARCH button or search dial to light the |
monitoring the video. | JOG indicator in the display section, then rotate the |
| search dial. |
| Playback is carried out at the speed according to the |
| speed of the search dial rotation. The playback |
| speed range is ±1 times normal speed by factory |
| default. |
| The search dial has no detents. |
|
|
Inhibit the unit from | Set the CHARA. DISPLAY menu item (see page 40) |
outputting text information | to OFF. |
(time data, operation mode |
|
indications, etc.) to the |
|
video monitor. |
|
|
|
Remove the cassette. | Press the EJECT button. |
| If a CNT value is shown on the time counter display, |
| the CNT value is reset. |
|
|
Disable the automatic | Set the AUTO REW menu item (see page 39) to |
rewind function. | DISABLE. |
|
|
Change the time period | Change the setting of the STOP TIMER menu item |
before the unit switches | (see page 41). |
from stop mode to standby |
|
off mode. |
|
|
|
Playback 2 Chapter
Playback 23