To display the desired time data in the time counter display

Operation Editing for Functions Convenient 3 Chapter

Time data type indicators

Time counter display

1

2

3

4

PB FS 48k44.1k32k

COUNTER SEL button

A B

MARK

Open the door on the lower part of the front panel, and press the COUNTER SEL button.

Each press of this button cycles through three options: CNT value, time code, and user bit data. The time data type indicator for each option lights as it is selected.

Time data

Time data shown in the time counter

type

display

indicator

 

 

 

COUNTER

CNT (count value of the time counter)

 

 

TC

Time code

 

 

U-BIT

User bit data

 

 

Note

When the REMOTE button is lit, the COUNTER SEL button does not operate while the tape is moving. In such cases, use the external equipment connected to the REMOTE connector on the rear panel to select the time data.

To reset the CNT value

Press the RESET (NO) button on the menu control panel. This resets the CNT value to 0:00:00:00.

Note

During playback, if the recording on the tape includes discontinuities, the counter may operate incorrectly at the corresponding points.

32 Displaying Time Data and Other Text Information