Sony 3-869-574-12(1), DSR-1600A, DSR-1600AP Returning Menu Settings to Their, Factory Default Settings, default setting, default settings, To return all settings to their factory

Settings Menu 4 Chapter

3 Follow the same procedure as in steps 3 to 8 of the			4 Press the SET (YES) button.
	procedure in the section “Changing the Settings of			The message “NOW SAVING...” appears on the
	Basic Items” on page 45 using the arrow buttons to
				monitor screen, and “Saving...” appears in the time
	select an item and change its setting.
				counter display, while the settings of all items are
4 When you have completed the settings, press the SET
				returned to their factory default settings. These factory
	(YES) button.			default settings are saved in memory.
	The message “NOW SAVING...” appears on the			Note
	monitor screen, and “Saving...” appears in the time			If you power off the unit while settings are being
	counter display, while the new settings are saved in			saved, settings may not be correctly returned to their
	memory.			factory default settings. Wait until the saving is
	When the saving operation is completed, the monitor			completed before powering off the unit.
	screen and time counter display return to their normal			To abandon the resetting operation
	indications.
				Instead of pressing the SET (YES) button, press the
				RESET (NO) button.
Returning Menu Settings to Their
				The display returns to menu level 1, leaving the
Factory Default Settings				settings unchanged.
After making menu setting changes, to return settings to
their factory default settings (setting initialization), use the
following procedure.
To return a particular setting to its factory
default setting
In the display for changing the target setting, press the
RESET (NO) button.
Carry out the procedure in the section “Changing the
Settings of Basic Items” on page 45 up to step 6, then with
the current setting displayed (in the example, if the setting
has been changed it will be “100%” or “50%”), press the
RESET (NO) button. The setting returns to its factory
default setting of “75%.”
To return all settings to their factory
default settings
Use the following procedure.
1 Press the MENU button on the menu control panel to
	display the menu selection.
2 Press the k button to display level 1 of the setup
	menu.
3 Press the RESET (NO) button.
	A message appears, to confirm whether or not you
	wish to return all settings to their factory default
	settings.
	Monitorscreen	“INITIALIZE ALL ITEMS TO
	message	FACTORY PRESET VALUES?”
	Message in the time	“Init setup?”
	counter display

48 Changing Menu Settings