Sony 3-869-574-12(1), DSR-1600A, DSR-1600AP Connection of a video monitor, Settings on an editing control unit

Settings and Connections 5 Chapter

Connection of a video monitor

Set up the following connections to enable monitoring of video and audio signals on a video monitor. In addition to the video and audio signals, you can have time data, the operation mode of the unit, alarm messages, and other information displayed as text on the monitor screen by setting the CHARA. DISPLAY menu item (see page 40) to ON (factory default setting).

75 Ω termination switch: ON (or attach a 75 Ω terminator.)

Input switches: Set according to the type of input signals.

Video monitor

	Composite		Audio input
	video input
VIDEO		2	1	AUDIO
	OUT
2(SUPER)				MONITOR OUT

DSR-1600A/1600AP

ACable with RCA phono plugs (not supplied)

B 75 Ω coaxial cable (not supplied)

Settings on an editing control unit

When connecting an editing control unit, make the settings as follows, according to the model.

PVE-500

No settings are required.

BVE-600/900/910/2000 (NTSC model) or FXE-100/ 120

Set the VCR constants as follows.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
80	16	00	96	05	05	03	80	0A	08	FE	00	80	5A	FF

BVE-600/900/910/2000 (PAL model) or FXE-100P/ 120P

Set the VCR constants as follows.

1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
81	16	00	7D	05	05	02	80	0A	07	FE	00	80	4C	FF

RM-450/RM-450CE

Set the DIP switches as follows.

•Left switches

	7	6	5	4	3	2	1	0
	OFF	−	−	OFF	−	−	−	−
•	Right switches (RM-450)
	)
	7	6	5	4	3	2	1	0
	OFF	−	OFF	ON	OFF	OFF	ON	ON
•	Right switches (RM-450CE)
	7	6	5	4	3	2	1	0
	ON	−	OFF	ON	OFF	OFF	ON	ON

BVE-800

Set the DIP switches as follows.

•SW2

	1	2	3	4	5	6	7	8
	ON	OFF	ON	ON	−	ON	ON	−
•	SW3 (NTSC model)
	1	2	3	4	5	6	7	8
	ON	ON	ON	OFF	−	ON	OFF	OFF
•	SW3 (PAL model)
	1	2	3	4	5	6	7	8
	OFF	OFF	OFF	ON	−	ON	OFF	OFF

56 Connections for an A/B Roll Editing System