Playback 2 Chapter
8 Press the KAbutton.
The display changes as follows.
SETUP MENU |
|
| >> REP TOP |
OPERATIONAL FUNCTION |
| ||
REPEAT FUNCTION |
|
| Time counter display |
REPEAT MODE | :OFF |
| |
|
| ||
REPEAT TOP | .A |
|
|
REPEAT END | :V.END |
|
|
A PRESET |
|
|
|
B PRESET |
|
|
|
|
|
|
|
Monitor screen
9 Press the j button to select “A PRESET.”
SETUP MENU |
|
| >> A preset |
OPERATIONAL FUNCTION |
| ||
REPEAT FUNCTION |
|
|
|
|
| Time counter display | |
REPEAT MODE | :OFF |
| |
|
| ||
REPEAT TOP | .A |
|
|
REPEAT END | :V.END |
|
|
|
|
|
|
A PRESET |
|
|
|
B PRESET |
|
|
|
|
|
|
|
Monitor screen
10Press the Bk button.
The A PRESET MODE screen appears. The time code value of the current point A is displayed below the screen title.
A PRESET MODE
A00:00:00:00
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
Monitor screen
11Use the KAor Bk button to select the digit in the time code value display that you want to change.
Each press of the button causes the digit to the left or right to begin flashing. Holding the button down moves the flashing digit continuously. If you want to clear the time code value, press the RESET (NO) button. The value is cleared to 00:00:00:00, and the leftmost digit begins flashing.
28 Playback