Once set, the point A or B time code value is held in the non-volatile memory of the unit until changed. It is not lost when the unit is powered off.

Note

When setting point A or B, you can only use a time code value. Even when COUNTER is selected with the COUNTER SEL button, you cannot use a CNT value to set point A or B.

To check the point A or B time code value

Press the KAor Bk button on the menu control panel. While the button is held down, the point A or B time code value is displayed on the monitor and in the time counter display.

If you hold down the KAand Bk buttons simultaneously, the value shown is the point B time code value minus the point A time code value. If the point A time code value is greater than the point B time code value, a minus sign (−) is shown before the value.

Inputting time code values for points A and B

Using the following procedure, you can modify the time code value for point A or B.

1,15

8,11 12

2,3,4,6,10,11

A

B

 

 

MARK

 

5,7,9,12

13

1 Press the MENU button.

 

 

The following menu display appears.

 

 

SYSTEM MENU

Setup menu

SETUP MENU

HOURS METER

Time counter display

 

Monitor screen

Playback 2 Chapter

Playback 25