Sony DVP-S725D Setting for the Signal to the Digital Output, Pdownmix, Pdigital Out

pDOWNMIX*

Switches the mixing down methods when you play a DVD on which the sound in Dolby Digital format is recorded.

•DOLBY SURROUND: when the player is connected to an audio component that conforms to Dolby Surround (Pro Logic).

•NORMAL: when the player is connected to a normal audio component.

*The setting affects the following connectors: –AUDIO OUT (1, 2) connectors

–DIGITAL OUT (OPTICAL, COAXIAL) connectors.

pDIGITAL OUT

Selects output signals via the DIGITAL OUT OPTICAL and COAXIAL connectors.

•ON: Normally select this position. When you select “ON,” set “DOLBY DIGITAL,” “MPEG” and “DTS.” For details on setting them, see “Setting for the Signal to the Digital Output.”

•OFF: when the player does not output the sound signals via DIGITAL OUT OPTICAL and COAXIAL connectors, if you select this position, the influence of the digital circuit upon the analog one is minimum.

Notes

•When you play the sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency). When the signals are output from AUDIO OUT (1,2) connector, sampling frequency stays at 96kHz and the output signals are converted to analog signals.

•When you select “OFF,” You cannot set “DOLBY DIGITAL,” “MPEG” and DTS.”

Setting for the Signal to the Digital

Output

When you select “ON,” set “DOLBY DIGITAL,” “MPEG” and DTS.”

Switches the methods of outputting audio signals when you connect a digital component such as a receiver (amplifier) having a digital connector, an audio component having a built-in DTS decoder, a DAT or MD via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord. For details on the connection, see page 11.

	AUDIO SETUP
		AUDIO ATT:		OFF
		AUDIO FILTER:		SHARP
		AUDIO DRC:		STANDARD
		TRACK SELECTION:		OFF
		DOWNMIX:	DOLBY SURROUND
		DIGITAL OUT:		ON
		DOLBY DIGITAL:		D-PCM
		DTS:		OFF
To set, press			, then ENTER .
To quit, press SETUP .

pDOLBY DIGITAL

Selects output Dolby Digital signals via the DIGITAL OUT OPTICAL and COAXIAL connectors. You cannot select this item when you set “DIGITAL OUT” to “OFF.”

•D-PCM (Downmix PCM): when you play the Dolby Digital sound tracks, the output audio signals are mixed down to 2 channels. With the settings of the item “DOWNMIX” in “AUDIO SETUP,” you can select whether the signals conform to Dolby Surround (Pro Logic) or not.

•DOLBY DIGITAL: when the player is connected to an audio component with a built-in Dolby Digital decoder.

Note

If the player is connected to an audio component lacking a built-in Dolby Digital decoder, do not set “DOLBY DIGITAL” in “AUDIO SETUP” to “DOLBY DIGITAL.” Otherwise, when you play the Dolby Digital sound track, a loud noise or no sound will come out from the speakers, affecting your ears or causing the speakers to be damaged.

Settings and Adjustments

57