Setups for the player, Directly, Player | Sony DVP-S725D guide

If you connect the player to a monitor or projector having component video input connectors that conform to output signals from the COMPONENT VIDEO OUT (Y, CB/B-Y, CR/R-Y) connectors on the player

Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.

COMPONENT VIDEO OUT			COMPONENT
Y	CB/	CR/	VIDEO IN
	B-Y	R-Y

CR

CB

Y

Notes

•Refer to the instructions supplied with the component to be connected.

•Do not connect this player to a video deck. If you view the pictures on your TV after making the connections shown below, a picture noise may appear.

	VCR		TV

			Connect
	CD/DVD		Connect
	CD/DVD		directly
	player		directly
	player

•Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 56.

Setups for the player

Some setups are necessary for the player depending on the TV or other components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 47.

• To connect the player to a wide-scr een TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9”(default setting). For details, see page 51.

• To connect the player to a nor mal TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For details, see page 51.

Getting Started

This player conforms to the PAL color system. When you play a disc recorded in the NTSC color system, the player outputs the video signal or the setup display etc. in the NTSC color system and the picture may not appear on the TV screen. In this case, open the disc tray and remove the disc.

9

Image 9

Sony DVP-S725D Setups for the player, To connect the player to a wide-scr een TV, To connect the player to a nor mal TV

Contents

CD/DVD Player Precautions Safety InstallingWelcome Table of Contents This Player Can Play the Following Discs About This Manual Chapter Terms for discs TitleTrack Structure Precautions Unpacking Inserting batteries into the remoteGetting Started Required cords TV Hookups To connect the player to a wide-scr een TV Setups for the playerTo connect the player to a nor mal TV Directly Receiver Amplifier Hookups When you play a DVD that is recorded in Mpeg format When you play a DVD that is recorded in DTS formatWith a digital DAT deck, etc Channel Surround Hookups Speaker placementAmplifier with 5.1 ch inputs Set each speaker position or distance, etc. See Center speaker Front speakerRear speaker R To cancel using the setup display on the way Select Français usingPress SET UP Select OSD using /., then pr ess /or Enter Playing Discs U Power You can turn on the player using the remotePlaying Discs Operation Playing at Various Speeds/Frame by Frame To change the playback speed Shuttle Mode While playing a disc, press pto stop playback Turn the click shuttlePress á To play from the beginning of the disc Using the title menu Using the Menu for EachPress Title Press ?//.//to select the title you want to play Playing Video CDs with PBC Functions PBC Playback Using the DVD Menu Using the DVD menuPress DVD Menu Press ?//.//to select the item you want to change When playing back a DVD Using the Front Panel DisplayGoing back to the menu screen Display information while playing the disc Using the Front Panel Display When playing back a CD/VIDEO CDDisplay information while playing a disc Using Various Functions with the Control Menu Using Various Functions with the Control Menu Using the Control Menu Display Control Menu Item List Control Menu Item List Searching for the Title/ Chapter/Track/Index/Scene When playing a DVD PTIME/TEXT or TIME/MEMO To cancel selectingWhen playing a Video CD during PBC playback pTIME/MEMO Checking the Playing Time and Remaining Time To cancel inputting Selecting a Start Point Using the Time CodeCurrent chapter when playing a DVD Select C Labeling discs Disc Memo Checking the Information of the DiscSelect Disc Memo Input / in TIME/TEXT or TIME/MEMO Disc Memo Input display appears Disc label is stored Checking the Information of the DiscTo correct the characters Text or Disc PAUDIO When playing a DVD Changing the Sounds ZDisplaying the audio information Disc Displaying the Subtitles Changing the SoundsPSUBTITLE SelectANGLE Changing the Angles ZPress Angle is changed to the selected angle Effects of each item Setting for Digital Cinema Sound Z Side Rear Enhanced Surround Creating the program Creating Your Own Program Program Play Press áto star t Program Play To cancel Program Play PWhen playing a Video CD or CDTo cancel programming To cancel the programmed order When playing a DVD and when Program Play is set to OFF Using VariousTo cancel Shuffle Play Playing in Random Order Shuffle Play Repeating a Specific Portion A÷B Repeat Playing Repeatedly Repeat Play To cancel A÷B Repeat Play A÷B Repeat setting display appearsSelect SET / in A-B Repea T Starting point point a is set PADVANCED When playing a DVD Checking the Play Information ZDisplays of each item Checking the Play Information Appears when the DVD has dual layers To adjust the picture items Adjustments for Playback Picture Video EQ Video Equalizer ZYou can adjust the following picture items individually PDNR Control Select the pictur e item you want to adjust using Adjustments for Playback Picture Video EQSelect Memor Y/ in Video EQ Video control display appears To cancel watching the strobe play To cancel displaying multi-anglesDisplaying Different Angles Simultaneously Z Dividing a Track into 9 Sections Strobe Play Setting and Selecting Favorite Scene Bookmark Setting the bookmarkScanning the Title, Chapter and Track Z Using the Setup Display Z Press SET UP to display the setup display on the TV screenSettings and Adjustments Select the item you want using /., then press / or Enter Using the Setup DisplaySelect the setting you want using ?//.//, then press Enter Press SET UP on the remote Default settings are underlined Setup Display Item List POSD On-Screen Display Setting the Language for Display and SoundPDVD Menu PAUDIO PTV Type Settings for Display Screen Setup ZPSCREEN Saver PBACKGROUND Picture is stored in memory PAUTO PlayPDIMMER Limiting Playback by Children Parental Control Custom Settings Custom Setup Standard Code number If you have forgot your password AUDIOATTattenuation Settings for Sound Audio SetupAudiofilter AUDIODRCDynamicRangeControl PDOWNMIX Setting for the Signal to the Digital OutputPDIGITAL OUT PDOLBY Digital Settings for Sound Audio Setup PMPEGPDTS PSIZE Speaker Set UpSelects the size of the speakers to be connected PDISTANCE Adjusting the speaker volume Setting for Speakers Speaker Setup Switch Number Buttons AdjustmentsControlling TVs with the remote Manufacturer Code Number Controlling an AV receiver amplifier With the remote SwitchBy pressing You can Code numbers of controllable receivers amplifiers Troubleshooting PowerPicture Troubleshooting SoundOperation Subtitles cannot be turned off when you play DVD Player does not play from the beginning when playing a discAngles cannot be changed when you play a DVD Player starts playing the DVD automatically First three characters Cause and/or Corrective Action Self-diagnosis function Specifications Glossary Video CD Code Language Language Code List Front Panel Index to Parts and Controls Index to Parts and Controls Rear Panel Remote Index