When using a TV

Turn on the TV and select the video input so that you can view the pictures from this system.

When connecting a video deck

Connect the video deck to the TV using a video cord (not supplied). However, do not connect this unit to the TV through the video deck. Otherwise, you may experience video leakage when watching video images from this system. Connect this unit directly to the TV as shown below.

TV

Video deck

 

 

 

Unit

 

 

 

 

 

 

 

 

Do not connect directly

Tip

For even higher quality video images:

–Use optional component video cords to connect the COMPONENT VIDEO input jacks on your TV to the COMPONENT VIDEO OUT jacks of this unit. If your TV is compatible with progressive format file signals, use this connection and press PROGRESSIVE on the unit repeatedly until

“P AUTO” or “P VIDEO” appears in the display (page 54).

–You can use an optional S Video cord to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack of this unit.

6For models equipped with a voltage selector, set VOLTAGE SELECTOR to the position of your local power line voltage.

Depending on the model, the VOLTAGE SELECTOR may differ.

VOLTAGE SELECTOR

220V 120V*

230-240V

* Saudi Arabian model : 120 - 127V

7Connect the power cord to a walloutlet.

The demonstration appears in the display.

Getting

When you press ?/1, the system turns on

 

and the demonstration automatically ends.

 

If the supplied adaptor on the plug does not

Started

fit your wall outlet, detach it from the plug

 

(only for models equipped with an adaptor).

 

8 (Except for Latin American and

 

Russian models)

 

Set the color system to PAL or NTSC

 

depending on the color system of your

 

TV.

 

The default setting for color system is

 

different depending on the area.

 

Each time you perform the procedure

 

below, the color system changes as follows:

 

NTSC y PAL

 

Use buttons on the unit for the operation.

 

1 Press ?/1 to turn off the system for the

 

operation.

 

2 Press ?/1 while holding down X.

 

The system turns on automatically and

 

the color system is changed.

 

“COLOR NTSC” or “COLOR PAL”

 

appears in the display.

 

Notes

•Keep the speaker cords away from the antennas to prevent noise.

•Be sure to match the color of the speaker terminals on the unit and the connectors.

•Be sure to connect the speakers securely and correctly. When connecting speaker cords, insert the connector straight into the terminals.

•The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 98).

•You cannot set the color system in the Power Saving Mode (see “Turning off the display” on page 79).

•When you play back a VIDEO CD recorded in a different color system from the one you set to the unit, the picture image may be distorted.

To connect optional components

See “Hooking up optional components” on page 85.

continued

11GB