Creating a party environment

(MHC-GNV111D only)

You can create a party environment by using X-ROUND for “moving” sound effect or/and SOUND FLASH for flashing effect.

To enjoy the X-ROUND effect, place your front and surround speakers at an equal distance from your listening position (see “Positioning the speakers (Example 1)” on page 13).

Moving sound effect

— X-ROUND

Use the buttons on the unit for the operation.

Press one of the X-ROUND buttons to select the X-ROUND mode you want.

The name of selected X-ROUND mode appears and the X-ROUND lights up in the display.

Tip

To change between AUTO WAVE and MANUAL WAVE, AUTO FADER and MANUAL FADER or AUTO BAL and MANUAL BAL, press AUTO/ MANUAL repeatedly until the mode you want appears in the display.

Select

To output sound

AUTO WAVE1),

In circular motion

MANUAL

 

WAVE2)

 

AUTO FADER1),

From front speakers to surround

MANUAL

speakers or vice versa

FADER2)

 

AUTO BAL1), From left speakers to right

MANUAL BAL2)

speakers or vice versa

RANDOM

In random position

 

 

TWISTER

In circular motion like “twister”

 

 

1)You can change the speed of sound movement by turning the X-ROUND JOG clockwise or counterclockwise.

2)You can manually change the sound movement from one speaker to another speaker by turning the X-ROUND JOG clockwise or counterclockwise.

To cancel the X-ROUND effect

Press X-ROUND OFF. “X-ROUND OFF” appears in the display.

Notes

•If you cannot get the sound effect you want, check the speaker connections.

•When the headphones are connected to the PHONES jack, X-ROUND mode automatically turned off and you cannot change the setting.

•When the X-ROUND mode is turned on, the audio output from the center speaker and subwoofer is cut off.

•When you press SOUND FIELD or turn on the test tone, X-ROUND mode is automatically turned off.

•You cannot turn on the X-ROUND mode when

–the headphones are connected.

–the “SURROUND” in “SPEAKER SETUP” is set to “NONE”.

–the test tone is performed.

Adjustment Sound

69GB