Timer recording radio programs

You can record from a preset radio station from a specified time.

To make timer recording, you must first preset the radio station (see “Presetting radio stations” on page 59) and set the clock (see “Setting the clock” on page 14).

1 Tune in the preset radio station (see “Listening to a preset radio station” on page 61).

2 Press TIMER MENU.

3 Press M or m repeatedly (or turn

.> on the unit clockwise or counterclockwise) to select “REC SET?”, then press ENTER.

“ON” appears and the hour indication flashes in the display.

4 Set the time to start recording.

Press M or m repeatedly (or turn .> on the unit clockwise or counterclockwise) to set the hour, then press ENTER.

The minute indication flashes in the display.

Press M or m repeatedly (or turn .> on the unit clockwise or counterclockwise) to set the minute, then press ENTER.

“OFF” appears and the hour indicator flashes in the display.

5 Set the time to stop recording following the same procedure as step 4.

The type of timer (“REC”), followed by the start time, the stop time and the preset radio station to be recorded (e.g., “TUNER FM 5”) appears in the display in sequence before the original display returns.

6 Load a recordable tape into Deck B.

Make sure the tape is in front side.

7 Press DIRECTION on the unit repeatedly to select “g” to record on one side or “j” (or “RELAY”) to record on both sides.

For recording from the reverse side, press FUNCTION +/– (or TAPE A/B on the unit) repeatedly to select “TAPE B”. Then, press

H(or nN on the unit) repeatedly until TAPE B reverse side indicator lights up to start playback of reverse side. Press x at the point where you want to start recording. When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of reverse side.

8 Press ?/1 to turn off the system.

Other operations

To

Do this

Check the setting 1 Press TIMER MENU. “TIMER SELECT?” appears in the display.

2Press ENTER.

3Press M or m repeatedly (or turn .> on the unit clockwise or counterclockwise) to select “REC SELECT?”, then press

ENTER.

Change the setting Start from step 1.

Cancel the Timer 1 Press TIMER MENU.

Recording“TIMER SELECT?” appears in the display.

2Press ENTER.

3Press M or m repeatedly (or turn .> on the unit clockwise or counterclockwise) to select “TIMER OFF?”, then press

ENTER.

78GB