Sony MHC-GNV111D, MHC-GNV99D 92GB, Picture, There is no picture, Picture noise appears, The JPEG image file cannot be played back

The JPEG image file cannot be played back.

•Recording was not performed according to the ISO 9660 Level 1, Level 2, or Joliet in the expansion format.

•The JPEG image file does not have the extension “.JPG” or “.JPEG”.

•The data is not stored in JPEG format.

•The image is larger than 3,072 (width) ⋅ 2,048 (height) in normal mode, or more than 3,300,000 pixels in Progressive JPEG mode.

•The “MODE (MP3, JPEG)” setting has been set to “AUDIO (MP3)” (page 30).

•The system can play back to a depth of 8 folders only.

•JPEG image files with a high width to length ratio cannot be played back.

•The disc contains more than 200 albums.

•The album contains more than 600 files when the “MODE (MP3, JPEG)” is set to “IMAGE (JPEG)”.

•The album contains more than 300 files when the “MODE (MP3, JPEG)” is set to “AUTO”.

•The DATA CD contains a DivX video file.

•This system cannot play back JPEG image files recorded on DATA DVDs.

The disc title, album title, track title, CD-TEXT and DVD-TEXT characters do not appear properly.

•Use a disc that conforms with ISO 9660 Level 1, Level 2, or Joliet in expansion format.

•The character code that can be displayed by this system are as follows:

–Upper cases (A to Z)

–Lower cases (a to z)

–Numbers (0 to 9)

–Symbols (< > * +, – / [ ] \ _)

Other characters may not be displayed correctly.

The surround effect is difficult to hear when you are playing a Dolby Digital or MPEG audio sound track.

•Make sure the sound field is set properly (page 67).

•Check the speaker connections and settings (pages 10 and 49).

•Depending on the DVD VIDEO, the output signal may not be the entire 5.1 channel. It may be monaural or stereo, even if the sound track is recorded in Dolby Digital or MPEG audio format.

The sound loses stereo effect when you playback an AUDIO CD, VIDEO CD, MP3 audio track, DivX video file or DVD VIDEO .

•Unplug the microphone or press KARAOKE MODE repeatedly until “m” dissappears from the display.

•Make sure the system is connected properly.

PictureThere is no picture.

•Press FUNCTION +/– repeatedly to select “DVD” (or press DVD on the unit).

•Check that the system is connected securely.

•The video cord is damaged. Replace it with a new one.

•Make sure you connect the unit to the video input jack of your TV (page 10).

•Make sure you turn on the TV and operate the TV correctly.

•Press PROGRESSIVE on the unit repeatedly to select “INTERLACE” if you connect your TV to the unit’s COMPONENT VIDEO OUT jacks and your TV cannot accept the progressive signal.

•You have set progressive format but your TV cannot accept the signal in progressive format. In this case, return the setting to interlace format (the default setting) (page 54).

•Even if your TV is compatible with progressive format (525p/625p) signals, the image may be affected when you set progressive format. In this case, return the setting to interlace format (the default setting) (page 54).

•Make sure you select the video input on the TV so that you can view the pictures from the system.

•Make sure you set the color system correctly, according to your TV color system.

•Make sure you connect the unit and your TV using only the supplied video cord.

Picture noise appears.

•Clean the disc.

•If video signal from your system has to go through your VCR to your TV, the copy-protection applied to some DVD VIDEO programs could affect picture quality. If you still experience problems after checking your connections, please try to connect your unit directly to your TV’s

S Video input (page 11).

•Set the color system to match your TV (page 43).

92GB