Setting the clock

1 Press ?/1 to turn on the system.2 Press TIMER MENU.

The hour indication flashes in the display.

3 Press M or m repeatedly to set the hour. 4 Press ENTER.

The minute indication flashes in the display.

5 Press M or m repeatedly to set the minute.6 Press ENTER.

The clock starts functioning.

To adjust the clock

1Press TIMER MENU.

“PLAY SET?” flashes in the display.

2Press M or m repeatedly to select “CLOCK SET?”, then press ENTER.

The hour indication flashes in the display.

3Do the same procedures as step 3 to 6 above.

Notes

•The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

•You cannot set the clock in power saving mode (page 79).

Performing QUICK SETUP

You can set the initial settings of LANGUAGE SETUP, TV TYPE and SPEAKER SETUP step by step in QUICK SETUP. After performing the QUICK SETUP, the system is ready for playing back of movies, music CDs, etc. To perform further speakers settings, see “Speaker settings” on page 49.

1 Turn on your TV and select the video input.2 Press ?/1 to turn on the system.

Note

Make sure that the headphone or microphone is not connected. Otherwise, you cannot perform

SPEAKER SETUP.

3 Press FUNCTION +/– repeatedly to select “DVD” (or press DVD on the unit).

“Press ENTER to run QUICK SETUP.” guide message appears at the bottom of the on-screen display.

4 Press ENTER.

The “LANGUAGE SETUP” display appears in the on-screen display.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

14GB