Sony MHC-GNV111D, MHC-GNV99D 50GB, ENTER, xSIZE, To return to the default setting after you change a setting, 5 Press M or m repeatedly to select “SIZE” or “DISTANCE”, then press

5 Press M or m repeatedly to select “SIZE” or “DISTANCE”, then press

ENTER.

6 Press M or m repeatedly to select the setup item, then press ENTER.7 Press M or m repeatedly to select or set a setting, then press ENTER.

Note

You cannot perform SPEAKER SETUP when you connect headphones or microphones to the unit.

To return to the default setting after you change a setting

Press CLEAR before you press ENTER. However, you cannot return “SIZE” setting to default value.

xSIZE

When you connect or disconnect center speaker, surround speakers or subwoofer, or you move the surround speakers, adjust the setting for CENTER, SURROUND and SUBWOOFER. Since the front speaker setting is fixed, you cannot change it.

90

A 45 A

B B

20

The default settings are underlined.

FRONT	YES
CENTER	YES: Normally select this.
	NONE: Select this when center
	speaker is not connected.
SURROUND	BEHIND: Select this if surround
	speakers are located in section B.
	SIDE: Select this if surround
	speakers are located in section A.
	NONE: Select this when surround
	speakers are not connected.
SUBWOOFER	YES: Select this when an optional
	subwoofer is connected.
	NONE: Select this when an
	optional subwoofer is not
	connected.

Notes

•When adjusting speakers setting, the sound may cut off for a moment.

•Depending on the settings of other speakers, the optional subwoofer may output the excessive sound.

•When you play back a DVD VIDEO that does not have subwoofer output recorded, note that no sound is produced from the subwoofer, even if “SUBWOOFER” is set to “YES”.

•When you connect an optional subwoofer, make sure you have set the “SUBWOOFER” to “YES”. If set to “NONE”, no sound is output from the optional subwoofer.

50GB