Changing the spectrum analyzer display

Use buttons on the unit for the operation.

1 Press AMP MENU repeatedly to select “SPECTRUM”.

The last selected spectrum setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes as follows:

SPECTRUM 1T

t SPECTRUM 2

Y

Y

SPECTRUM OFF

SPECTRUM 3

Rt SPECTRUM 4 T R

3 Press ENTER.

MHC-GNV111D onlyWhen X-ROUND mode is selected1 Press AMP MENU repeatedly to select “X-POSITION”.

The last selected spectrum setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes as follows:

X-POS ON* y X-POS OFF

*The spectrum analyzer display will synchronize with the selected X-ROUND effect.

3 Press ENTER.

Adjusting the brightness of the front panel display

Use buttons on the unit for the operation.

1 Press AMP MENU repeatedly to select “DIMMER”.

The last selected dimmer setting appears in the display.

2 Turn OPERATION DIAL clockwise or counterclockwise to select the setting you want.

The display changes as follows:

tDIMMER 1 y DIMMER 2 T t DIMMER OFF T

3 Press ENTER.

80GB