Sony MHC-GNV111D, MHC-GNV99D 15GB, 7 Press ENTER, Started Getting, To quit QUICK SETUP, If you make a mistake, xIf you have a 4:3 standard TV, To change the settings of QUICK SETUP

5 Press M or m repeatedly to select a language, then press ENTER.

The setting is selected and the “SCREEN SETUP” display appears in the on-screen display.

The language options are different depending on the area.

SCREEN SETUP
	TV TYPE:	16:9
	COLOR SYSTEM:	16:9
	SCREEN SAVER:	4:3 LETTER BOX
	BACKGROUND:	4:3 PAN SCAN
	4:3 OUTPUT	FULL

6 Press M or m repeatedly to select the setting that matches your TV type.xIf you have a 4:3 standard TV

Select 4:3 LETTER BOX or 4:3 PAN SCAN (page 42)

xIf you have a wide-screen TV or a 4:3 standard TV with wide-screen mode

Select 16:9 (page 42)

7 Press ENTER.

The setting is selected and the “SPEAKER SETUP” display appears in the on-screen display.

SPEAKER SETUP

SIZE:

DISTANCE:

LEVEL(FRONT):

LEVEL(SURROUND):

TEST TONE:		OFF
	FRONT:		* 3.0m
	CENTER:		3.0m
	SURROUND:		3.0m

8 Press M or m repeatedly to select thefront speaker distance from your listening position, then press ENTER.

You can set from 1.0 to 7.0 meters. Repeats this step to adjust center and surround speaker distance.

The setting is selected and “QUICK SETUP is complete.” appears in the on-screen display.

If you make a mistake

Press DISPLAY, then repeat step 1 to 8.

To quit QUICK SETUP

Press DISPLAY.

To change the settings of QUICK SETUP

1Press DISPLAY when playback is stopped.

The Control Menu appears in the on-screen display.

2Press M or m repeatedly to select (SETUP), then press ENTER.

3Press M or m repeatedly to select “QUICK”, then press ENTER.

The “LANGUAGE SETUP” display appears in the on-screen display.

4Do the same procedures as step 5 to 8 of “Performing QUICK SETUP”.

Notes

•The guide message appears at the bottom of on-screen display when you turn on the system for the first time or after performing “RESET” (see “To return the DVD setup to the default settings*, perform reset as follows:” on page 94).

•If you do not want to perform QUICK SETUP, press CLEAR in step 3. The guide messages will disappear from the on-screen display.

•When there is a disc in the unit or the disc tray is opened, the guide message does not appear in the on-screen display. To perform QUICK SETUP, press Z OPEN/CLOSE on the unit to remove the disc and press Z OPEN/CLOSE on the unit again to close the disc tray.

•If you want to change each setting individually, see “Disc – Various functions” on page 38.

Started Getting

15GB