Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a certain time, so that you can fall asleep to music.

Press SLEEP repeatedly.

Each time you press the button, the minute display (the turn-off time) changes cyclically as follows:

90min t 80min t 70min

t… t 10min t OFF

Other operations

To

Do this

Check the

Press SLEEP once.

remaining time

 

Change the time Press SLEEP repeatedly to select

to turn off

the time you want.

Cancel the Sleep Press SLEEP repeatedly until

Timer“SLEEP OFF” appears in the display.

Note

“SLEEP” lights up in the display when the Sleep Timer is activated.

Tip

You can use the Sleep Timer even if you have not set the clock.

76GB

Waking up to music

— Play Timer

You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 14).

1 Prepare the music source you want to playback.

•Disc: Load a disc.

•Tape: Load a tape with the side you want to play back facing forward.

•Radio: Tune in the preset station you want (see “Listening to the radio” on page 61).

2 Press VOLUME +/– (or turn MASTER VOLUME on the unit clockwise or counterclockwise) to adjust the volume.

3 Press TIMER MENU.

4 Press M or m repeatedly (or turn

.> on the unit clockwise or counterclockwise) to select “PLAY SET?”, then press ENTER.

“ON” appears and the hour indication flashes in the display.

5 Set the time to start playback.

Press M or m repeatedly (or turn .> on the unit clockwise or counterclockwise) to set the hour, then press ENTER.

The minute indication flashes in the display. Press M or m repeatedly (or turn .> on the unit clockwise or counterclockwise) to set the minute, then press ENTER.

“OFF” appears and the hour indication flashes in the display.

6 Set the time to stop playback following the same procedure as step 5.