This setting is automatically stored as the user equalizer setting you selected in step 5. The previous setting stored at this memory location is erased and replaced by the new setting.
To cancel storing
Turn OPERATION DIAL clockwise or counterclockwise in step 5 to select “EXIT?”, then press ENTER.
To call up a user equalizer setting
Turn OPERATION DIAL clockwise or counterclockwise until the user equalizer setting number you want appears in the display.
Press ENTER.
6
Turn OPERATION DIAL clockwise or counterclockwise to select a user equalizer number (1~3) you want to store the equalizer setting.
5
3 Repeat step 1 and 2 to adjust the level of other frequency bands.
4 Press ENTER.
A user equalizer number flashes in the display.
Frequency band
Frequency level
Turn OPERATION DIAL clockwise or counterclockwise to adjust the level.
2
Press EQ BAND repeatedly to select a frequency band.
1
Adjusting the graphic equalizer and storing the user equalizer setting
You can adjust the sound by raising or lowering the level of specific frequency band, then store up to three user equalizer setting in the memory. Use the buttons on the unit for the operation.

Selecting the preset effect

Use the buttons on the unit for the operation.

Turn OPERATION DIAL clockwise or counterclockwise to select the preset effect you want.

Preset effect options

Effect

Category

ROCK

Standard music sources

POP

 

JAZZ

 

DANCE

 

SOUL

 

TECHNO

 

HIP HOP

 

 

 

MP3 EQ

MP3 audio tracks

 

 

FLAT

Original music source

 

 

USER EQ 1

User equalizer setting

USER EQ 2

 

USER EQ 3

 

 

 

To cancel the preset effect

Turn OPERATION DIAL clockwise or counterclockwise until “FLAT” appears in the display.

Note

To store the user equalizer setting, see “Adjusting the graphic equalizer and storing the user equalizer setting” on page 66.

66GB