This unit has a
CD player, MD player, | Portable CD |
digital amplifier, etc. | player, etc. |
Optical | Optical |
plug | mini- |
| plug |
| |
(not supplied) |
to LINE IN (OPTICAL)
Insert a recordable MD and start recording.
To record, see “Recording an MD right away !” (page 6). To record from a portable CD player, set the CD player to pause and then start recording.
The recorder automatically recognizes the line cable and switches to digital or analog input.
Notes
•You can make a digital recording only from an optical type output.
•Some portable CD players with the ESP* system cannot send out digital signals when it is activated. In this case, release the ESP system.
* Electronic Shock Protection
You can easily make digital recordings of a digital source on an MD.
Before
1 Slide SYNCHRO REC to ON. “SYNC” appears in the display.
SYNC
2 Slide REC to the right while pressing its button.
The recorder stands by for recording. Play the source sound. The recorder starts recording when it receives the playing sound.
z
When there is no sound from the player more than 3 seconds during synchro- recording, the recorder stands by for recording automatically. When the sound comes from the player again, the recorder starts
Notes
•Do not switch SYNCHRO REC after step 2. Recording may not be made properly.
•If you record in monaural, do steps 1 and 2 in “Recording in monaural for double the normal recording time of an MD” (page 12) before doing the