(Manual recording)
When you record with an analog input, the sound level is adjusted automatically. If necessary, you can set the level manually.
=
+
P |
REC
1 While holding down P , hold REC to the right for more than 2 seconds. “ManualREC” appears and the recorder stands by for recording. To return to the automatic control, while the recorder is in record pause mode, hold REC to the right for more than 2 seconds.
2 Play the source.
3 While observing the level meter in the display, adjust the recording level by pressing + (+) or =
Set the level so that it hits the second indicator from the top when the recorder receives the maximum sound.
Volume decreases | increases |
Note |
|
The recording level should be adjusted while the recorder is in standby mode. You cannot adjust it while recording.
4 Press P again to start recording.
To stop recording, press p .
The recording level control is switched back to automatic control.
z
When you record with microphone input, select the input level with MIC SENS (page 12).