REC
CD player, cassette recorder, etc. (source)
pressing its button.
“REC” lights up and recording starts.
To stop recording, press p .
”Toc Edit” flashes to record data of the recording (the track’s start and end points, etc.). Do not move or jog the recorder or disconnect the power source while the indication is flashing in the display.
To | Press |
Pause | P 1) |
| Press P again to resume recording. |
|
|
Add recording to the end of the | END SEARCH and slide REC. |
previous recording. |
|
|
|
Record over partway through the | ( , + or = to find the start point |
previous recording. | of recording and press p to stop. Then |
| slide REC. |
|
|
Remove the MD. | p and open the lid.2) |
1)A new track is added at the point where you pressed P , and the recording will be marked with the new track number when you resume recording.
2)Once you open the lid, the point to start recording will change to the beginning of the first track. When recording on a recorded MD, check the point to start recording on the display.
If the recording does not start
•Make sure the recorder is not locked (page 18).
•Make sure the MD is not
•Premastered MDs cannot be recorded over.
For models supplied with the AC plug adaptor
If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.
z
•The level of the recorded sound is adjusted automatically.
•You can monitor the sound being recorded. Connect the supplied headphones with remote controller to 2 /REMOTE and adjust the volume by pressing VOLUME +/– (VOL +/– on the remote controller). Sound levels are copied onto the MD automatically and independently of the volume for monitoring.