Operating Your Components with the Remote Commander

When you operate a non-Sony component, make sure you set the component code first (page 8).

2

PROGRAM

3

1

TV

SAT

VCR

DVD

CBL

AMP

CD

MD

TAPE

M1

M2

M3

Example: To play a CD player

1Press the desired Component Select button.

The Commander comes on and the keys for operating the selected component are displayed.

2Press the desired key in the touch-key display.

When the remote control signal is sent,is shown on the display.

You may also use the w +/– buttons, the MUTING button and the PROGRAM +/– buttons if necessary. See “Table of Preset Functions” (page 59) for the functions of keys and buttons for each component.

3When you are done using the Commander, press COMMANDER OFF to power off the Commander.

Note

The remote control signals may be different for some components or functions. In this case, programme the remote control signals with the learning function (page 15). Note, however, that components and functions that do not support the remote control of infrared signals will not work with this Commander.

Continued 13GB