2Press the OFF key.

All the component names stop flashing and stay lit, and “ON” flashes.

3Press COMMANDER OFF.

When the preset lock is on

If you try to set a component code number (page 8) or perform learning for the Component Select buttons (page 32), “NG” will flash on the display.

To unlock the preset lock

To unlock the preset lock, follow the same procedure as the above and press the 1 ON key in Step 2. “1 OFF” appears on the display.

Changing the AutoPower-Off Time of theCommander

The Commander is preset at the factory to switch the power off automatically after 10 minutes if left unused (Auto Power-Off). To change this time, perform the following procedure.

You can set the Auto Power-Off time up to 90 minutes, in units of 10 minutes, or disable the Auto Power-Off function.

Note

The Auto Power-Off function only turns off the power of the Commander, but not of the component.

2

PROGRAM

1

3

TV

SAT

VCR

DVD

CBL

AMP

CD

MD

TAPE

M1

M2

M3

Continued 47GB