1After Step 1 (page 44), while pressing the Component Select button (VCR), press the key you want to teach repeatedly.
Each time the key is pressed, the display is changed in order.
2When the desired display appears, release the Component Select button.
3Then follow Steps 3 to 6 (page 44).
Notes
•If you do not change the display of a key, the default display is used.
•You cannot change the display of the keys
that are not framed with 
(the number keys 0 to 9, +10 and ENTER).
To clear an alias key and button
1After Step 1 (page 44), while pressing the LIGHT button, press the key or button you want to erase.
The cleared key flashes together with other settable alias keys.
2Press COMMANDER OFF.
To clear all the alias keys at once
While pressing the LIGHT button, press the Component Select button.
Note
The M1, M2 and M3 buttons are factory set with alias keys. If you clear all the alias keys, the M1, M2 and M3 button alias keys are also cleared.
To restore the factory setting
1While pressing COMMANDER OFF, press the M1, M2 or M3 button.
2Press the M1, M2 or M3 button twice while pressing the LIGHT button.