Executing a Series of Commands

—System Control Functions (continued)

2While pressing the LIGHT button, press the SYSTEM CONTROL button (A, B or C) or the number key (1 – 9) of which programmed commands you want to erase.

The programme for the selected button is erased.

To erase the SYSTEM CONTROL A or C button

At the factory, the SYSTEM CONTROL A button is preset with a series of power-off commands for Sony components and the SYSTEM CONTROL C button with a series of power-on commands for Sony components. To erase the programmed commands for each button, follow the steps below.

1While pressing COMMANDER OFF, press the MORE button.

2While pressing the LIGHT button, press the SYSTEM CONTROL button (A or C).

The programme for the selected button is erased.

When you want to set a new programme to this SYSTEM CONTROL button, follow Steps 2 to 6 on pages 23 and 24.

To set the SYSTEM CONTROL A or C button back to the factory setting

To reset them to the factory settings, follow the steps below.

1While pressing COMMANDER OFF, press the MORE button.

2While pressing the LIGHT button, press the SYSTEM CONTROL button (A or C).

Note

The interval setting (page 29) is not reset to the factory setting, even if you perform these steps.

26GB