Transferring Data between Remote Commanders (continued)
Receiving the data
This Commander can receive the data of another Sony
To receive the all data from another remote commander
3
4
|
|
|
|
| PROGRAM |
2 |
|
|
|
| 1 |
TV | SAT | VCR | DVD | CBL | AMP |
CD | MD | TAPE | M1 | M2 | M3 |
1While pressing COMMANDER OFF, press PROGRAM – and w
PROGRAM
2Press the r button.
R: Transfer data
r: Receive data
3Press the 1 key.
1:All data of the Commander
2:Data of a Component Select button
4Press the ENTER key.
As the data is received, the corresponding component name stays lit. If the all data have been successfully received, the backlight of the display turns off.
Notes
•If the Commander is not ready for receiving the data, press CLEAR key, then OK key to clear the learned signal on all or one of the Component Select buttons.
•If “NG” appears during data transfer, go back to Step 3 and continue the operation or press COMMANDER OFF to stop the operation. If you continue the operation, you have to set the sending remote commander again to send data.