Selecting a Channel with a Single Key Press (continued)
Example: To programme TV channel 123 for the PIP TEXT key
1While pressing COMMANDER OFF, press MUTING.
2While pressing PROGRAM +, press the Component Select button (TV).
PROGRAM
3Press the macro key (in this case, PIP TEXT).
The selected macro key lights. The number keys and “ENTER” flash.
4Press the keys for the operation in order (1t 2 t 3 t ENTER).
Note
If you enter more than four keys, the last four keys are programmed for the macro key.
5Press the EXIT button to confirm the Channel Macro.
“1,” “2,” “3,” and “ENTER” appear twice.
Note
If you enter more than four keys, the last four keys are programmed for the macro key.
6Press COMMANDER OFF.
Notes
•You cannot programme the Channel Macro function for a macro key that has “learned” a signal. Try again with another macro key, or clear the “learned” signal (page 19) from the button and programme the Channel Macro function on it.
•If you change the component code for a key that has been programmed with the Channel Macro function, the new signal is transmitted when you press the corresponding macro key.