Adding an Extra Function to the Component Select Buttons (continued)
Example: To programme the input select signal of your amplifier to the CD button
Adding a command that is required when selecting a component
In addition to the original function of selecting the operating keys and buttons of the desired component, the Component Select button can have another remote control signal by “learning.”
For example, if you always have to change input select of the amplifier to CD when listening to the CD player, programme the signal of “changing the amplifier’s input select” to the CD button of this Commander. Then whenever you press the CD button, it automatically works as the original CD Component Select button and changes also the amplifier input select to CD. (In this case, the amplifier should be turned on first.)
Note
Some specific remote control signals may not be learned.
PROGRAM
2
5
3 | TV | SAT | VCR | DVD | CBL | AMP |
CD | MD | TAPE | M1 | M2 | M3 |
1Place the
Remote control of your component
about 2 – 4 inches (5 – 10 cm) away
2While pressing COMMANDER OFF, press PROGRAM + and w +.
PROGRAM
Learnable SYSTEM CONTROL keys and number keys flash in the display panel.
Note
The name of a Component Select button for which a signal has already been learned stays lit. If you want to programme a new signal for that button by learning, clear the learned signal first (page 33).