Executing a Series of Commands
—System Control Functions (continued)
To programme a new series of operations for buttons which have already been set
SYSTEM CONTROL A or C button:
Erase the factory preset programme (page 26).
Other buttons:
Erase the programme (page 25).
3Press the Component Select buttton (in the case, TV) for the component to operate.
The keys for the selected component flash.
If the component has the power- on and
Both the OFF and ON keys are displayed and you can select either of them to program.
It is useful to set the exact command for
4Press key(s) or button(s) for the desired operation.
If you want to power on the TV, press the 1 key.
5Repeat Steps 3 and 4 and programme the buttons and keys for the series of operations.
In this example, press the following buttons and keys.
6When you have programmed all the keys, press COMMANDER OFF.