Controlling the Monitor Image
You can control the monitor image from the image control section on the main viewer page.
Image control section
Operating the Camera
You can operate the camera from the image control section on the main viewer page.
For this function, user access right Level 2 to Level 4 is required (see page 23).
Click 
Control on the menu section to display the camera control parts.
Image control section (camera control parts)
Operating the
Selecting the frame rate
Click the
You can select the frame rate from among the following:
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, Fastest
1, 2, 3, 4, 5, 6, 8, 12, 16, 20, Fastest
The numbers indicate “FPS” (the number of frames transmitted per second).
With Fastest, the camera transmits the maximum number of frames possible for the connected line. The maximum frame rate is 30 FPS for the
Note
The frame rate options indicate the maximum number of frames that can be transmitted. The number of frames actually transmitted may vary depending on the network environments and camera settings (image size and image quality settings).
Selecting the view size
Click the
You can select the view size from among the following: Auto, 640 × 480, 320 × 240, 160 × 120
Auto is determined by the image size specified with Image size on the Camera setting page (see page 19).
Panning and Tilting
You can pan and tilt the camera using the
Setting the pan/tilt mode
Click 
. Each click alternates the
Panning and tilting using the 8-direction arrow buttons
Observe the monitor image and click the arrow button indicating the direction in which you want to move the camera. The camera moves and the monitor image follows.
Camera
Controlling the Monitor Image / Operating the Camera
11
