4 Click on the still image to specify the trimming portion.
A red frame that appears when you clicked indicates the trimming portion.
The trimming portion is determined as shown below:
Point rotated by 180° around the |
|
axis of the center of the still image | Still image |
White balance mode
Select the white balance mode.
You can select from among Auto, Indoor, Outdoor, One push WB, ATW and Manual.
If you select One push WB, the ONE PUSH TRIGGER button is displayed. Click the button to adjust the white balance instantly.
If you select Manual, the R Gain and B Gain controls are displayed. Set 0 to 255 for each control.
Administrating the Camera
Red trimming | Center of the Clicked point |
frame | still image |
To change the trimming portion, click on another point on the image.
5 Click OK at the bottom of the window.
The trimmed image is displayed on the main viewer page.
6 To close the image, click 
on the
Zoom mode
Select the zoom mode.
Select Full to operate the optical zoom of × 25 and the electronic zoom of × 12, giving × 300 in total. The electronic zoom will operate after the optical zoom. Select Optical only to operate the optical zoom of × 25 only. In this case, you can use an electronic zoom of × 2 by clicking the DZOOM x 2 button on the main viewer page. To cancel the electronic zoom, click the DZOOM x 1 button. (See “Zooming” on page 12.)
Focus mode
Select the focus mode.
Select Auto to adjust the focus automatically.
Select Manual to adjust the focus manually using the NEAR and FAR buttons on the main viewer page. If you click the ONE PUSH AF button, the focus is adjusted instantly. (See “Focusing” on page 12.)
Lower Half of Camera setting Page
Exposure mode
Select the exposure from among Full auto, Shutter priority, Iris priority and Manual.
The setting items required for each setting appear.
Full auto: Adjusts the exposure automatically using the electronic shutter, iris and gain. Select the Back light compensation menu On or Off.
Shutter priority: Adjusts the exposure automatically using the iris and gain. Select the electronic shutter speed from the Shutter
Iris priority: Adjusts the exposure automatically using the electronic shutter and gain. For the iris adjustment, select the F number from the Iris drop- down list.
Manual: Select the electronic shutter, iris and gain from the
Back light compensation
Select On to activate the backlight compensation, or Off to deactivate it.
20
Setting the Camera — Camera setting Page
