Sony SNC-RZ30N Capturing a Monitor Image, Controlling Alarm Output, To save the captured image

Operating the Camera

Note

If the camera is installed on a desk top, the sent still image is upside down.

Recording a Still Image on an ATA Memory Card or the Built-in Memory of the Camera

If you select Memory save and click , the current still image is captured and stored in the memory specified on the Image memory setting page.

To use this function, you need to select the Use image memory function option and the Manual mode on the Image memory setting page.

For details, see “Recording Images in Memory — Image memory setting Page” on page 35.

Note

If the camera is installed on a desk top, the recorded still image is upside down.

Controlling Alarm Output

If you select Alarm out 1 or Alarm out 2 and click , you can control alarm out 1 or alarm out 2 of the I/O port on the camera manually. Each click switches the relay between short-circuit and open alternately.

To use this function, you need to select the Use alarm out 1 (or 2) function option and the Manual mode on the Alarm out 1 or Alarm out 2 setting page.

For details, see “Setting the Alarm Out 1 or 2 — Alarm out 1 or 2 setting Page” on page 34.

For the connection of peripheral devices to the Alarm out of the I/O port, see the supplied Installation Manual.

Capturing a Monitor Image

If you click the Capture button on the menu section, the current still image is captured and displayed on the monitor image section.

Note

If the camera is installed on a desk top, the captured still image is upside down.

To save the captured image

Right-click on the monitor image and select Save As from the menu. Then, the Save Picture dialog appears. Type the file name and specify the destination to which the image file is to be stored, and click Save. The image is saved in the JPEG format.

14

Capturing a Monitor Image