Setting the Schedule
— Schedule setting Page
When you click Schedule on the Administrator menu, the Schedule setting page appears.
Use this page to set up to six schedules used for the preset position function, Day/Night function, FTP client function, SMTP function, Alarm out 1 or 2 function and Image memory function.
Setting the Activity Detection Function —
Activity detection setting Page
When you click Activity detection on the Administrator menu, the Activity detection setting page appears.
Use this page to set up for the activity detection to link various applications.
Administrating the Camera
Schedule No. 1 to Schedule No. 6
For each schedule, specify Start time (hour and minutes) and End time (hour and minutes), and check the days of the week that you want to activate the function.
OK/Cancel
See “Buttons common to every setting page” on page 16.
Sensitivity
Select the sensitivity of the activity detection from the
Tip
The Sensitivity of the activity detection means a proportion of the changed area (pixels) to the whole activity detection area.
OK/Cancel
See “Buttons common to every setting page” on page 16.
Setting the Activity Detection Area
Set the activity detection working area as follows:
1 Determine the view angle of the camera at which you want to perform activity detection, using the pan, tilt and zoom.
2 Click Activity detection on the Administrator menu.
A still picture is captured and the Activity detection setting page appears.
40
Setting the Schedule — Schedule setting Page / Setting the Activity Detection Function — Activity detection setting Page
