Item

Explanation

EXIT

Exits the setting process

 

without saving the

 

measurement results.

 

 

3Press V/v repeatedly to select the parameter, then press .

AUTO EQ type Explanation

FULL FLAT

Makes the measurement of

 

frequency from each speaker

 

flat.

 

 

ENGINEER

Sets the frequency

 

characteristics to a set that

 

matches that of the Sony

 

listening room standard.

 

 

FRONT REF

Adjusts the characteristics of

 

all the speakers to match the

 

characteristics of the front

 

speaker.

 

 

OFF

Set the auto calibration type

 

to off.

 

 

Tip

The size of a speaker (LARGE/SMALL) is determined by the low characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want.

When you select “PHASE INFO”

You can check the phase of each speaker (in phase/out of phase).

Press V/v repeatedly to select a speaker, then press to return to step 1 in “To confirm/save auto calibration when GUI function is turned off.”

Display Explanation

IN

The speaker is in phase.

 

 

Display

Explanation

OUT

The speaker is out of phase. The

 

“+” and “–” terminals of the

 

speaker may be connected the

 

other way around. However,

 

depending on the speakers,

 

“OUT” appears on the display

 

even though the speakers are

 

connected properly. This is

 

because of the speakers’

 

specifications. In this case, you

 

can continue to use the receiver.

 

 

– – –

No speakers are connected.

 

 

Tip

Depending on the position of the sub woofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value.

Selecting a sound field type

For details on each sound field type, see “Enjoying a pre-programmed sound field” (page 58).

Press 2CH/A.DIRECT, A.F.D.,

 

MOVIE, or MUSIC repeatedly.

Other

The selected sound field type appears on the

 

display.

Operations

You can also use the 2CH/A.DIRECT, A.F.D.,

 

MOVIE, or MUSIC buttons on the receiver.

 

Listening to the sound without any adjustment (ANALOG DIRECT)

Press 2CH/A.DIRECT.

You can also use 2CH/A.DIRECT on the receiver.

Listening to the FM/AM radio

For details on the tuner function, see “Tuner Operations” (page 75).

continued

107GB