Selecting an operation screen to operate the component connected to the DIGITAL MEDIA PORT adapter

You can select an operation screen using the GUI menu, depending on the DIGITAL MEDIA PORT adapter you want to use. For some adapter, such as TDM-BT1 or TDM- NW1, the operation screen is fixed and you cannot change it on the GUI screen.

1

3,

4,6

5

2

1 Make sure that the AMP button is lit.

If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).

2 Press MENU repeatedly to display the GUI menu on the TV screen.

3 Press V/v repeatedly to select “Music,” then press or b.

“DMPORT” appears beside “Music.”

4 Press or b.

The component connected to the DIGITAL MEDIA PORT adapter is recognized and “DMPORT” on the screen will change to each component’s name. The category of the component connected to DIGITAL MEDIA PORT adapter appears on the screen.

Note

An icon which shows the component recognized is displayed on the TV screen. If the adapter connected cannot be recognized, “DMPORT” is displayed on the TV screen.

5 Press OPTIONS to display “Function List.”

6 Press V/v to select “DMPORT

Control.”

You can select the following modes in this menu;

•System GUI

This mode is for the TDM-iP1 and TDM-NC1. The list of tracks will be displayed on the GUI screen of the receiver. You can select a track you want and play back it on each GUI screen.

•Adapter GUI

This mode is for the TDM-iP1 and TDM-NC1. The menu of the adapter will be displayed on the TV screen.

•iPod

This mode can be selected only when the TDM-iP1 is connected.

If “DMPORT Control” is not displayed, see the operating instructions supplied with component for details on operating that component.

88GB