70GB
1 Make sure that the AMP button is lit.
If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).
2 Press V/v repeatedly to select “Settings,” then press or b. The Settings menu list appears on the TV screen.
3 Press V/v repeatedly to select “Speaker,” then press .
4 Press V/v repeatedly to select “Test Tone,” then press .
5 Press V/v repeatedly to select the speaker pattern you want.
2-6
The Settings menu list appears on the TV screen.
3 Press V/v repeatedly to select “Speaker,” then press .
4 Press V/v repeatedly to select “Speaker Pattern,” then press .
Select “Speaker Pattern” according to the speaker system which you are using. You do not need to select the speaker pattern after auto calibration.
1
If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).
2 Press V/v repeatedly to select “Settings,” then press or b.
Making settings with the Test Tone menu
Make sure that the AMP button is lit.
1