• Frequency Characteristic

6

Press b.

7

Press to select “Start.”

8 The measurement starts in five seconds.

9 Measurement starts.

The measurement process will take approximately 30 seconds with a test tone. Wait until the measurement process completes.

Note

You cannot measure the speaker height of the surround speakers and the surround back speakers. Set the position of the surround speakers from “Position” in the Speaker settings menu.

Tips

•Operations other than turning the receiver on or off are deactivated during the measurement.

•When connecting special speakers, such as dipole speakers, the measurements have not been performed correctly or auto calibration cannot be performed.

To cancel the measurement

The measurement is cancelled when you change the volume, switch functions, change the setting of the SPEAKERS switch, or connect headphones.

Confirming/saving the measurement results

1 Confirm the measurement result.

When the measurement ends, a beep sounds and the measurement result appears on the TV screen.

44GB