Recording using the receiver
You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component.
1
Recording onto a MiniDisc or audio tape
You can record onto a MiniDisc or audio tape using the receiver. See the operating instructions supplied with your MD deck or tape deck.
1 Press the input button of the playback component.
2 Prepare the playback component for playing.
For example, insert a CD into the CD player.
3 Prepare the recording component.
Insert a blank MD or tape into the recording deck and adjust the recording level.
4 Start recording on the recording deck, then start playback on the playback component.
continued
Using the sleep timer

You can set the receiver to turn off automatically at a specified time.

SLEEP

Press SLEEP repeatedly.

Each time you press SLEEP, the display changes cyclically as follows:

When sleep timer is being used, “SLEEP” lights up.

Tip

To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be changed.

Operations Other

99GB