You can use following parameters to adjust the tonal quality (bass/treble level) of all speakers, store up to 5 different equalizer settings and apply them. These settings are applied to all sound fields and for each speaker.
Bass | Treble |
Level (dB)
Frequency (Hz)
Notes
•This function does not work in the following cases.
–The
–Input signals of which the sampling frequency is more than 96 kHz are being received.
•If you adjust the equalizer during DTS 96/24 signal reception, the signal will be played only at 48 kHz.
1
OPTIONS
1 Make sure that the AMP button is lit.
If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).
2 Press V/v repeatedly to select “Settings,” then press or b.
The Settings menu list appears on the TV screen.
3 Press V/v repeatedly to select “EQ,” then press .
4 | Press V/v repeatedly to select | Speakers Advanced | |
Setting | |||
| the preset number that you | ||
|
| ||
| want to register as the number |
| |
| to store the equalizer | Up | |
| adjustment, then press . | ||
|
|
The equalizer adjustment screen appears on the TV screen.
5 Choose the speaker you want to adjust using B/b, then press .
6 Press B/b repeatedly to select “Bass” or “Treble,” then press V/v to adjust the parameter.
Tip
You can adjust the front speaker bass and treble level with TONE MODE and TONE on the receiver.
7 Press to enter the parameter.
continued
73GB