Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 34).

Tip

The tuning scale for direct tuning is shown below.

• FM band

100 kHz

• AM band

10 kHz*

* The AM tuning scale can be changed (page 124).

Automatic tuning

1

2-4

1 Make sure that the AMP button is lit.

If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).

2 Press V/v repeatedly to select “FM” or “AM,” then press or

b.

The FM or AM menu list appears on the TV screen.

3 Press V/v to select “Auto

Tuning,” then press .

4 Press V/v.

Press V to scan from low to high, press v to scan from high to low.

The receiver stops scanning whenever a station is received.

In case of poor FM stereo reception

1Press OPTIONS.

2Press V/v to select “FM Mode,” then press .

3Press V/v to select “MONO,” then press .

Operations Tuner

75GB