–When you connect speakers with impedance of 16 ohms or higher in both “A” and “B”
configuration:
Set “Impedance” to “8 Ω” in the Speaker settings menu.
–For other types of speakers in other
configurations:
Set “Impedance” to “4 Ω” in the Speaker settings menu.
You can select the front speakers you want to drive.
SPEAKERS switch
Started Getting
Set the SPEAKERS switch to select the front speaker system you want to drive.
Note
This setting is not available when headphones are connected.
Set to To select
AThe speakers connected to the FRONT SPEAKERS A terminals.
BThe speakers connected to the FRONT SPEAKERS B terminals.
A+B | The speakers connected to both the |
| FRONT SPEAKERS A and B |
| terminals (parallel connection). |
|
|
OFF | No audio signals are output from |
| any speaker terminals, or the PRE |
| OUT jack (sub woofer). |
|
|
41GB