Settings for the video(Video settings menu)

You can use the Video settings menu to make settings for video. Select “Video” in the Settings menu. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).

Settings for HDMI (HDMImenu)

You can use the HDMI menu to make the required settings for components connected to the HDMI jack. Select “HDMI” in the Settings menu. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 37).

Video settings menu parameters

xResolution

(Converting video signals)

Lets you convert the resolution of analog video input signals.

•DIRECT

•AUTO

•480i/576i

•480p/576p

•720p

•1080i

•1080p

For details on operating, see “In the video input/output conversion table classified by the menu settings” (page 33).

HDMI menu parameters

xHDMI Control

Lets you turn the components connected to the HDMI jack using an HDMI cable on or off.

•ON

•OFF

Note

When you set “HDMI Control” to “ON,” “HDMI Audio” may be changed automatically.

xHDMI Audio

(Setting HDMI audio input)

Lets you set the HDMI audio signals output from the playback component connected to the receiver via an HDMI connection.

•TV+AMP

The sound is output from TV’s speaker and the speakers connected to the receiver.

Notes

•The sound quality of the playback component depends on the TV’s sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play multi-channel source.

•When you connect the receiver to a video component (projector, etc.), sound may not be output from the receiver. In this case, select “AMP.”

•When you select the input that you have assigned the HDMI input, sound does not output from the TV.

•AMP

The HDMI audio signals from the playback component is only output to speakers

56GB