b)If you connect only one surround back speaker, connect it to the SURROUND BACK SPEAKERS L terminals.
c)When you connect a sub woofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a sub woofer, then sound may not be output.
Notes
•When you connect all the speakers with a nominal
impedance of 8 ohms or higher, set “Impedance” in the Speaker settings menu to “8 Ω.” In other connections, set it to “4 Ω.” For details, see “8:
Setting the speakers” (page 40).
•Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals.
Started Getting
17GB