Note
Set “Sur Back Assign” to “OFF,” then connect the surround back speakers to this receiver when you want to change the connection from a
xCrossover Freq
(Speaker crossover frequency)
Lets you set the bass crossover frequency of speakers that has been set to “SMALL” in the Speaker menu. Measured speaker crossover frequency is set for each speaker after the auto calibration.
The adjusted value is set for each speaker when you adjust the speaker crossover frequency using “Crossover Freq” after the auto calibration.
xMulti Ch SW Level
Lets you increase the level of the MULTI CHANNEL INPUT sub woofer channel signal by +10 dB. This adjustment may be necessary when connecting a DVD player to the MULTI CHANNEL INPUT jacks.
The sub woofer level from DVD players is 10 dB lower than that of Super Audio CD players.
xD.Range Comp
(Dynamic range compressor)
Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only.
•OFF
The dynamic range is not compressed.
•STD
The dynamic range is compressed as intended by the recording engineer.
•MAX
The dynamic range is compressed dramatically.
Tips
•Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the
dynamic range information included in the Dolby Digital signal.
•“STD” is the standard setting, but it only enacts light compression. Therefore, we recommend using the “MAX” setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression.
xDistance Unit (Distance unit)
Lets you select the unit of measure for setting distances.
• meter
The distance is displayed in meters.
• feet
The distance is displayed in feet.
72GB