3 While monitoring the sound, adjust the selected parameter using V/v and 
.
For details, see following menu parameters.
Note
The setup items you can adjust on each menu vary depending on the sound field.
To adjust the effect level1Press V/v repeatedly to select the effect level, then press 
in step 2.
2Press V/v repeatedly to adjust the level.
Higher settings apply more surround effect. You can adjust the level from 20% to 120% in 5% steps.
Custom Settings menu parameterxCenter Width Control
Lets you perform further adjustments for Dolby Pro Logic II and IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PLII Music” or “PLIIx Music”.
You can adjust the distribution of the center channel signal, generated through the Dolby Pro Logic II decoding, to the left/right speakers.
xDimension Control
Lets you perform further adjustments for Dolby Pro Logic II and IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PLII Music” or “PLIIx Music”.
You can adjust the difference between the front channels and the surround channels.
xPanorama Mode
Lets you perform further adjustments for Dolby Pro Logic II and IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PLII Music” or “PLIIx Music”.
•ON
Lets you enjoy surround sound by spreading the sound field of the front speakers to the left and right of the seating position.
•OFF
This function is not activated.
xScreen Depth
This parameter is provided especially for Cinema Studio EX modes.
Lets you create the sensation that the sound of the front speakers comes from inside the screen in your listening room, just like in theaters.
•ON
Lets you create a sound environment where you will feel the sound comes directly out of a large screen in front of you.
•OFF
This function is not activated.
xVirtual Speakers
This parameter is provided especially for Cinema Studio EX modes.
•ON
Virtual speakers are created.
•OFF
This function is not activated.
Sound Surround Enjoying
63GB