You can select the test tone type.

5 Select the speaker you want to adjust, then press .

The test tone is output from each speaker in sequence.

6 Adjust the parameter using V/v, then press .

Tips

•To adjust the level of all speakers at the same time, press MASTER VOL +/–.

•The adjusted value is shown on the display during adjustment.

When a test tone is not output from the speakers

•The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly.

•The speaker cords may have the short-circuit problem.

When a test tone is output from a different speaker than the speaker displayed on the screen

The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match.

Test Tone menu parameters

xTest Tone

• OFF

• AUTO

The test tone is output from each speaker in sequence.

• FIX

You can select which speakers will output the test tone.

xPhase Noise

•OFF

•L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/ SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/L, L/SR

Lets you output the test tone sequentially from adjacent speakers.

Some items may not be displayed, depending on the setting of the speaker pattern.

xPhase Audio

• OFF

• L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/ SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/L, L/SR

Lets you output front 2 channel source sound (instead of the test tone) sequentially from adjacent speakers.

Some items may not be displayed, depending on the setting of the speaker pattern.

Other menu parameters of Speaker settings

xSur Back Assign

(Settings of the surround back speaker(s))

•OFF

If you have not connected surround back speakers, select “OFF.”

•BI-AMP

If you connect front speakers in a bi- amplifier configuration, select “BI-AMP”.

continued

Up Setting Speakers Advanced

71GB