Note
When the speaker(s) is (are) out of the phase, “Out Phase” is displayed on the TV screen. The “+” and
Tip
The displayed unit of distance for models for US and Canada is feet. The unit of distance for models for countries/areas other than US and Canada is meters. You can change the unit of distance use in “Distance Unit” in the Speaker settings menu.
2 Press 
to select “Next.”
When “Save auto calibration (auto speaker setup) results?” appears on the TV screen, you can select whether to confirm the warning (“Yes”) or not (“No”).
Follow the instructions of the TV screen when you select “Yes.”
For details on warning and error codes, see “Message list after auto calibration measurement” (page 47).
Tip
Press 
on the remote when “Please Press ENTER.” appears on the TV screen.
3 Press B/b repeatedly to select “Yes,” then press 
.
4 Press V/v repeatedly to select the auto calibration type, then press b.
The measurement results are saved.
Started Getting
Parameter | Explanation |
Full Flat | Makes the measurement of |
| frequency from each |
| speaker flat. |
|
|
Engineer | Sets the frequency to one |
| that matches that of the |
| Sony listening room |
| standard. |
|
|
Front Reference | Adjusts the characteristics |
| of all the speakers to match |
| the characteristics of the |
| front speaker. |
|
|
OFF | Sets the auto calibration EQ |
| to off. |
|
|
5 Press 
.
The exit screen appears.
Notes
•DTS 96/24 signals are played back as 48 kHz signals if the frequency response measurement result is utilized.
•The frequency response measurement result is not utilized in the following cases.
–The
–“2ch Analog Direct” is being used.
–Input signals of which the sampling frequency is more than 96 kHz are being received.
continued
45GB